05-11-2010 10:41 AM - edited 03-19-2019 12:55 AM
Running CUCM 7.1 and using RTMT version 8.1.
I want to Trace H323 activity on ONE Gateway. How do I do that with the versions I have?
I know I could select individual devices in older trace settings (3.x,4.x etc) cannot figure out
how to do it with the RTMT and Linux systems.
Thanks
Solved! Go to Solution.
05-11-2010 10:51 AM
If you mean to enable the traces you still do that at the serviceability page on CUCM under trace settings
HTH
java
If this helps, please rate
www.cisco.com/go/pdihelpdesk
05-11-2010 10:51 AM
If you mean to enable the traces you still do that at the serviceability page on CUCM under trace settings
HTH
java
If this helps, please rate
www.cisco.com/go/pdihelpdesk
05-11-2010 11:05 AM
I want the CUCM to trace H323 activity on ONE of my multiple H323 gateway (10.1.1.1) not all at once.
I go into servicability and cannot see where I can get specific and pick only one gateway.
05-11-2010 11:14 AM
yes I found it. Forgot it was grayed out. Thanks!
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: