05-03-2020 11:57 AM
Hi,
we have CUCM configured with gateway cisco 2911 and anlog POT to FXO. and planning to upgrade to SIP trunk ( checking from local ISP and cloud as well). so do i need extra T1 and E1 interface card or can i use the gig0/0 interface on the router.
Regards,
Shiyas
Solved! Go to Solution.
05-03-2020 12:47 PM
With SIP you wouldn’t use any E1/T1 interface. You use the ethernet interfaces on the router, normally you would use one as the inside, connected to the internal network and another for outside, connected to the circuit to the ITSP.
05-03-2020 12:47 PM
With SIP you wouldn’t use any E1/T1 interface. You use the ethernet interfaces on the router, normally you would use one as the inside, connected to the internal network and another for outside, connected to the circuit to the ITSP.
05-03-2020 12:51 PM
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: