Hi All,Can anyone help me how to verify if we have this licenses? Can anyone instruct me how to check verify if configured in our device?SERVICE SKUPRODUCT NUMBERDescriptionCON-PSSW-DEVUWLL-ANLG-DEV-UWLAnalog, non-app device add-on for UWLCON-PSSW-CU...
A customer sent me this a short while ago: https://www.digicert.com/blog/tls-certificate-lifetimes-will-officially-reduce-to-47-days I'm offiically horrified by this. The only Collab product that even sort of supports certificate automtaion is Expre...
Hi Looking for some help on possible options to solve the following scenario. I've attached an outline diagram. Normal call flow is CUCM >> Internal SIP trunk 2 >> CUBE 1 >> External SIP Trunk 1 >> SIP provider (PSTN) We can have a situation where S...
My current LDAP is set to pull every new user into CUCM. When the system was setup (prior to me) this wasn't an issue because the company was smaller and used less service accounts. Now, however, we are larger and use many service accounts that are s...
Hello, this is a recurrent question but I see only a very old one. we use Cisco Jabber 14 and 15 and Expressway MRA X15.2.4 is it still needed configure the directory like UDS and build a webserver for load the contact photos? regards,
Our customer is using CUCM with a SIP trunk to CUBE, the CUBE dial plan sends some calls to a third party. The call flow is:ITSP -> SIP -> CUBE -> SIP -> CUCM -> SIP -> CUBE -> SIP -> Third Party. The CUCM part of the call is answered by an operator ...
Hi all, in need some help, hope i can explain my problem correctly.Our company uses a third party contact center solution and we have different call center extensions for each departement.The SIP Trunk connection works fine between Callmanager and co...
Hi Looking for some real work advice on an upcoming upgrade from version 14 - 15 on my CUCM cluster. In the past we have been able to complete direct upgrades but this time we will have to use one of the following. PCD Migration Task Fresh Insta...
Is there a way to export all the phones that are created with their current or last known IP address?Basically, a table like the find and list phones page.
I am currently running 1 sip trunk and are using voice class e164-pattern-map XXX to route calls based on the inbound DID; all works great. I now have to add a second sip provider with a bunch of different DID's and point those calls to and from thi...
Hi,I had CUCM 11.5 and upgraded it to version 15 SU3a with data export method and changed publisher hostname during that.After that all phones which are 79xx get host not found in corporate directory.The phone URL parameters and secure phone URL para...
I am playing around with SIP Route Patterns in Call Manager and wondering if I can prefix digits to calls that use it.It’s CUCM version 14.0 SU3. I see there is a field to enter the Prefix Digits for Outgoing Calls.But it does not seem to do anything...
Hello,I have been tasked with putting analog phones on a VG350. We have a lot of phones and for each one we have to fill out the (what I'm going to call) profile (see photos). Is there a way to make these settings a "template" and just have to update...
one of our customer wants to migrate from 11.5 to 15. i found we can use data export/import method for this migration if there is new hardware available or enough resources available in host machine.but what im seeing in the steps is that shutdown th...
Good day everyone,I have issue after upgrade CUCM from 12.5 to 15.0, where I cannot find phone especially with specific detail.In my case, I tried to find phone with specific description and filter "contains". when I click find button only showed tot...
