Here is what I would like to accomplish. We have two seperate locations one in DC and one in PA. Our phone system(UC560) is located here in PA. I would like to use SPA504G's at our remote location(DC). Is this a posibility? Currently I do not have a VPN connection between the two offices and would like to stay away from this if at all possible.(It's tough allocating funds) Right now all I have really tried is changing the "key system IP address" on the SPA504G to the public IP of the UC560. Are there any ports that need forwarded to the UC560?
hi Team, we are planning to deploy Multi-Factor Authentication for Jabber. The main requirement is to use MFA over internet (MRA).Is it possible to deploy MFA just for MRA and don't touch impact any on-prem existing setup?Can someone please guide on ...
Looking to expand your professional network? Interested in gaining an edge with exclusive technology insights? Engage with Cisco experts, share feedback on products and connect with peers from across the globe. Cisco Champion 2021 applications are open fo...
UCCX does not natively protect HTTP Triggers.
I wanted to come up with a solution to handle HTTP cookie based authentication.
There is a zip file for this project attached to this article. It was written on UCCX 12.5...
CUCM can backup the manually or have sehchduler to backup the configuration and historical reports from the server diester recovery systemStep 1. Navigate to CUCM > Disaster Recovery System > Backup > Manual Backup as shown in the...