cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2083
Views
3
Helpful
3
Replies
Highlighted

SRST Incoming is not working getting issue destination out of order

We have configured SRST at Remote branch.

Please find configuration.

Please let me know if is there any changes in this configuration.

I have one question should i create dial-peer for incoming call.

call-manager-fallback

max-conferences 8 gain -6

transfer-system full-consult

ip source-address 10.108.20.6 port 2000

max-ephones 50

max-dn 50

system message primary SRST Active

keepalive 20

ccm-manager fallback-mgcp

application

global

service alternate default

voice service voip

allow-connections sip to sip

fax protocol t38 version 0 ls-redundancy 0 hs-redundancy 0 fallback none

sip

  bind control source-interface GigabitEthernet0/0/0

  bind media source-interface GigabitEthernet0/0/0

  registrar server expires max 1200 min 60

voice class codec 1

  codec preference 1 g711ulaw

  codec preference 2 g711alaw

  codec preference 3 g729r8

voice register global

esrst

timeouts interdigit 5

system message "SRST Mode"

max-dn 50

max-pool 50

voice register pool  1

id network 10.108.22.0 mask 255.255.255.0

no digit collect kpml

voice-class codec 1

voice translation-rule 1

rule 1 /^62726\(6..\)$/ /6\1/

!

voice translation-rule 2

rule 1 /^62726\(5..\)$/ /6\1/

!

!

voice translation-profile SRST1

translate called 1

!

voice translation-profile SRST2

translate called 2

!

voice-port 0/1/0:15

translation-profile incoming SRST1

!

voice-port 0/1/1:15

translation-profile incoming SRST2

!

DID range =627266XX

dial-peer voice 11 pots

description "SRST_LOCAL_MOB_CALLS"

incoming called-number 66..

destination-pattern 9[7-9].........

port 0/1/0:15

forward-digits 10

!

dial-peer voice 12 pots

description "SRST_LOCALCAllS"

incoming called-number 66..

destination-pattern 9[1-7].......

port 0/1/0:15

forward-digits 8

!

dial-peer voice 13 pots

description "SRST_STDCALLS"

incoming called-number 66..

destination-pattern 90[0-9].........

port 0/1/0:15

forward-digits 11

!

dial-peer voice 14 pots

description "SRST_ISDCALL"

incoming called-number 66..

destination-pattern 900T

port 0/1/0:15

prefix 00

DID range =627265XX

dial-peer voice 1 pots

description "SRST_LOCAL_MOB_CALLS"

incoming called-number 65..

destination-pattern 9[7-9].........

port 0/1/1:15

forward-digits 10

!

dial-peer voice 2 pots

description "SRST_LOCALCAllS"

incoming called-number 65..

destination-pattern 9[1-7].......

port 0/1/1:15

forward-digits 8

!

dial-peer voice 3 pots

description "SRST_STDCALLS"

incoming called-number 65..

destination-pattern 90[0-9].........

port 0/1/1:15

forward-digits 11

!

dial-peer voice 4 pots

description "SRST_ISDCALL"

incoming called-number 65..

destination-pattern 900T

port 0/1/0:15

prefix 00

1 ACCEPTED SOLUTION

Accepted Solutions

Re: SRST Incoming is not working getting issue destination out of order

Hi,

use de following debug and send the log please:

debug voice ccapi inout

Best regards,

Marcelo Morais

3 REPLIES

Re: SRST Incoming is not working getting issue destination out of order

Hi,

the incoming called-number command is one of the responsible for the dial-peer incoming calls, to make the dial-peer more clear you can remove all the incoming called-number commands and insert the following lines:

dial-peer voice 66 pots

description "SRST_INCOMING_FROM_PSTN 0/1/0"

incoming called-number 66..

direct-inward-dial

port 0/1/0:15

dial-peer voice 65 pots

description "SRST_INCOMING_FROM_PSTN 0/1/1"

incoming called-number 65..

direct-inward-dial

port 0/1/1:15

Hope this helps,

Marcelo Morais

Re: SRST Incoming is not working getting issue destination out of order

Hi Marcelo,

I have configured this but getting issue

Cause i = 0x8292 - No user responding

Re: SRST Incoming is not working getting issue destination out of order

Hi,

use de following debug and send the log please:

debug voice ccapi inout

Best regards,

Marcelo Morais

CreatePlease to create content
Ask the Expert- Webex Hybrid Services Solutions