cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
4222
Views
0
Helpful
1
Replies
Beginner

Stereo audio codec for video conferencing device MX300

We have MX300 G2 which is registered on call manager which is configured to use g729 to call inter-site.

As per MX300 datasheet it does support 20KHz stereo audio feature. But I have tried call manager region with all possible codec that is available for MX300 (64-and 128-kbps AAC-LD, G722, G711, G729) all of them are mono.

Is it possible to have stereo audio during video conferencing on MX300 which is registered on call manager?

Everyone's tags (5)
1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted
Cisco Employee

Re: Stereo audio codec for video conferencing device MX300

Hi,

As far as I know the only stereo codecs are: L16, MPA, OPUS, AMR-WB+, MPA-Robust, aptx.

From those probably the only ones that the MX can use are L16 or OPUS.

Regards,

Christian.

View solution in original post

1 REPLY 1
Highlighted
Cisco Employee

Re: Stereo audio codec for video conferencing device MX300

Hi,

As far as I know the only stereo codecs are: L16, MPA, OPUS, AMR-WB+, MPA-Robust, aptx.

From those probably the only ones that the MX can use are L16 or OPUS.

Regards,

Christian.

View solution in original post

CreatePlease to create content