SX80 Multisite support

[laxminarayan_jutlawar1]

Hi Team,

SX80 support Multisite but how many ?

In data sheet it is given as five way, four way and three way what is the meaning.

SX80 support for 1+3 or 1+4 or 1+5

has in SX20 support for 1+3 multiparty call.

So SX80 there is confuse if any one knows please share.

[Manish Gogna]

Hi,

5 way means 1+4 ,  4 way means 1+3 and 3 way means 1+2.

Manish

[laxminarayan_jutlawar1]

Hi Manish,

Thanks for your input..

SX80 codec in built  how many multiparty support as in CCW i gone through it was showing the Multisite option.

[Manish Gogna]

Hi Laxminnarayan,

The admin guide for SX80 says "Embedded five-way Cisco TelePresence MultiSite with  individual transcoding (no external bridge)."

http://www.cisco.com/c/dam/en/us/td/docs/telepresence/endpoint/sx-series/tc7/administration-guide/sx80-administrator-guide-tc73.pdf

Manish

- Do rate helpful posts -

[laxminarayan_jutlawar1]

Hi Manish,

Thanks for your input and support in cisco basic endpoint is CTS SX20 and it support only 1+3 and apart for this any higher endpoint or codec is not there.

But in polycom there is 1+3 HDX and 1+5 Group 500 and 1+8 Group 700 so many time in compete we lose this case.

Once again thanks for your input.

Regards

Laxminarayan