Tech Tip:How to enable Voice Recording for a single phone on CUCM ?
For Call recording you will need to integrate CUCM with an external Call recorder .The Recorder must interface with Cisco Unified Communications Manager SIP trunk to receive recording calls.Nice/Witness Recorders have been tested; Verint and other third-party vendors manufacture suitable recorders.
The following modes of call recording exist: •Automatic recording •Application-invoked recording
In automatic recording, the recording session automatically establishes when agent answers or initiates a call. The recording option is enabled per Line appearance from the DN configuration page.To enable recording of an agent, set the Recording Option in the line appearance of the agent to Automatic Call Recording Enabled or Application Invoked Call Recording Enabled.For more information on Recording and the required configuration, see the features guide.
Table of Contents:
1. Reference URLs
2. Type of Certificates
3. Regenerate certificates that have no CTL/ITL impact [no phone impact]
4. Regenerate certificates that have CTL/ITL impact [medium phone impact]
5. Step to delete expired certif...
I have been using the recent release of the WebEx Desktop App (39.9) which has Wireless Sharing feature. Prior to this, we were using the proximity application for sharing, where we can find the performance logs on the %temp% folder of the client machine....
Cisco Recommends Dual NIC deployment for Expressways. But single NIC deployment can be achieved. Points to be noted for single NIC: > Firewall must support NAT Reflection, if not then you can use dual NATing to achieve NAT reflection on unsup...
Learn how Cisco is transforming how you communicate in the modern workplace with new capabilities like expanded Webex calling, unified app experiences, and intelligent devices and tools.
Webex Unified Platform
Deep Dive Briefings