UC520/7965/7916 configue BLF/SD as on CCM?

[stathopoulos1]

Hi All,

Have a uc520 with a 7965/7916. The gui does not appear to allow programming blf/sd combo buttons. Seems they are 2 seperate entities. Also, when buttons are programmed as SD, the name appears on the 7916, but not when configured as Watch or Monitor(BLF settings). Am I missing something?

As always, any help would be appreciated.

[Jaime Valencia · Accepted solution]

Have you tried doing it via CLI?

The guide explains really well how to do this

Configuring Presence Service

http://www.cisco.com/en/US/partner/docs/voice_ip_comm/cucme/admin/configuration/guide/cmepres.html

HTHjavaIf this helps, please ratewww.cisco.com/go/pdihelpdesk

[stathopoulos1]

Thanks for your help, javalenc

G