08-23-2013 08:21 AM - edited 03-19-2019 07:10 AM
We have a UC520 and we keep getting numbers like these that will grab our FXO lines and just hang. I have to shut the port and no shut the port to clear them. any suggestions to keep these numbers from locking up the FXO lines?
0x2C37F 25B8 0x87B04C1C 0/1/1 0/2:1 *1212791753 g711ulaw 0/51
0x2C381 25BE 0x87B07914 0/1/2 0/2:4 *1212792294 g711ulaw 0/52
0x2C389 25D1 0x87B02BEC 0/1/0 0/2:6 *1212791832 g711ulaw 0/50
thanks
Solved! Go to Solution.
08-23-2013 11:07 AM
Take a look at this document:
http://www.cisco.com/en/US/tech/tk652/tk653/technologies_tech_note09186a00800ae2d1.shtml
---
Posted by WebUser Asad Raza from Cisco Support Community App
08-23-2013 11:07 AM
Take a look at this document:
http://www.cisco.com/en/US/tech/tk652/tk653/technologies_tech_note09186a00800ae2d1.shtml
---
Posted by WebUser Asad Raza from Cisco Support Community App
08-26-2013 04:33 PM
That was good thanks. Now my lines say S_SETUP_FAIL when I do a sh voice call summary. they still work but this is a strange error. any idea?
08-26-2013 10:28 PM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide