UC500 series platform with 262144 Kbytes of main memory
Readonly ROMMON initialized
With some search online I found and downloaded full UC500 software pack UC540-8.6.2
Extracted but I do not know how to load image on UC540 and which files I should load to CF. Well just to try it, I connected Ethernet cable to port 1 on UC540 other end to my laptop, but I don't have any NIC activity. My laptop nic shows no cable plugged in (btw all 8 ports are solid green on UC540 maybe it is hardware failure?). Well, I will move forward just to see what happens. So I found couple guides, how to load new iOS on Cisco device. Used TFTP and tried to load cue-installer.uc500.8.6.5 to CF memory just to see what happens. This is what I ran in rommon:
Invoke this command for disaster recovery only. WARNING: all existing data in all partitions on flash will be lost! Do you wish to continue? y/n: [n]: y ........... ARP: address resolution for 10.0.1.107 timed out. ARP failed with failure code 1. TFTP transfer aborted.
So this tells me that I don't have network connectivity, to load image via TFTP, am I using wrong port on UC540 why I don't get NIC activity?
So couple questions which I can't figure out:
what would be a proper way to load needed files on CF card, would card reader work?
Which files should be on CF card to get UC540 to factory defaults?
What steps should be performed to get it to factory defaults, that I could continue Quick configuration guide from step download CCA Cisco configuration assistant and Connect an Ethernet cable to one of the PoE ports on the front panel of the UC 540.
I am hitting a wall and can't find any info to move further. Any docs, links with info to clear the clouds would be helpful.
When an Ad hoc conference is triggered by an endpoint to escalate a point-to-point call into a three-way call.HQ-CUCM sends an API request via HTTPS to the Cisco Meeting Server to set up a conference. You can see from the event log of CMS that API us...
You want in some scenarios different URIs or call-IDs and different access code are used by guest and host participants to join a meeting, and different rights or privileges, for example add or remove participants, mute audio or video, or when there...
Opus is an adaptive codec that provides better audio call quality than G.711/G.729 voice codecs and in a low bandwidth environment. The codec has a very low algorithm delay and is it is highly scalable in terms of audio bandwidth, bitrate, and comple...
Background:When deploying a multisite with centralized call processing across multiple countries, the digit manipulation can be complex, in this scenario US Site as HQ, GE Site in Germany and AU Site in Australia use different dial plan.We need to unified...
Version 3.3 introduces the ability to schedule meetings and see upcoming meetings in web app. Web app users can schedule meetings, modify the scheduled meetings, and notify participants via email. Scheduler is a new component that enables scheduling meeti...