11-16-2017 01:27 AM - edited 03-19-2019 12:56 PM
Hello
Is there a recommendation on the upgrade path that would be needed to move from legacy version 1.5.4 to version 3.0.3? Are we ok to upgrade straight to the 3.0.3 version or is it recommended to phase this through lower version first?
Thanks
FF
Solved! Go to Solution.
11-16-2017 05:57 AM
FF,
I just did this on several C220-M3s; I upgraded straight from 1.5 to 3.x, everything worked fine.
The only oddity that I had was that I was doing it from CIMC and during the process you get booted out of the CIMC and when you go to log back in you get wrong username or password; even if you close the browser and open it back up. You need to clear the cache in the browser to be able to log back in.
The whole process takes about 20+ minutes for each box.
11-16-2017 05:57 AM
FF,
I just did this on several C220-M3s; I upgraded straight from 1.5 to 3.x, everything worked fine.
The only oddity that I had was that I was doing it from CIMC and during the process you get booted out of the CIMC and when you go to log back in you get wrong username or password; even if you close the browser and open it back up. You need to clear the cache in the browser to be able to log back in.
The whole process takes about 20+ minutes for each box.
11-16-2017 07:00 PM
Thanks Justin
Will give it a go soon in that case.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide