Unable to Install CUCM 9.1.2 As Subscriber Node on IBM X3650 M2
I am unable to install CUCM 9.1.2 as a subscriber node on third party approved server - IBM x3650-M2 (single E5504, 146GB HDD) with 4GB RAM. I am getting an error message that this hardware in incompatible. In short its not passing hardware validation.
I am using a bootable CUCM 9.1.2 DVD for this installation. I have another subscriber server which is running on the same server at a different location.
Can you please check and let me know if there is anything that needs to be checked from the server end so that I can successfully install the subscriber node.
Please do let me know if you need any further information.
Well clearly something is different in the parts between the two servers. Does it exactly match the parts list outlined in table 4 of the IBM Server Solutions document? RAID controller differences have gotten me in the past for example. The supported servers matrix does show this remains supported through 9.1.
Note: You will not be able to upgrade to 10.0 (already shipping) or beyond without migrating to a VMware-based deployment on new servers since the legacy IBM hardware doesn't meet the minimum specs. Just FYI since you will be at a dead end as soon as you deploy this.
Thank you for your reply. I compared the table shared and I can see two difference. One being that I have two 146 GB SAS HDD instead of 300 GB, I compared the specification on the live server and it had the same HDD configuration.
The other difference I see is with the RAID controller the server which is in production is having MR10 controller -
Product Name : IBM ServeRAID-MR10i SAS/SATA Controller
Serial No : P486740910
FW Package Build: 11.0.1-0040
And the once we are attemting to install has SR-BR10i adapter. I am attaching a screen shot of the same for your reference.
Can you please let me know if the RAID adapters needs to be changed.
Hi,I'm facing problem while trying to login Cisco Prime License Manager. When I type login and password it show me “Invalid Username or Password. Please try again.”. But login and password correct. I reset password but it is show the same error. &nbs...
Hello everyone,after updating the CUCM to the last version 18.104.22.16800-97 a customer complains about errors on an applications server. These errors did not occur before the update. Phones can no longer be controlled. Only after a reinitialization of the ...
Hello, We have been facing issues with backup of drfcomponent.XML & Processnode.XML files to our backup servers during scheduled Backup in our CUCM 11.0 servers.We have been using Titan FTP server for Backup. I see error on backup statusERRO...
To participate in this event, please use the button to ask your questions
At the beginning of 2020, no one would have imagined the changes in work and learning habits that we would face in the foll...