Unity 5.x in a Voice Messaging Configuration with Exchange configuration
We've set up our 2 Unity servers as per http://www.cisco.com/en/US/docs/voice_ip_comm/unity/5x/installation/guide/vmexfo/5xcuigvmefo050.html - we have 2 servers,UNINTY01 as the primary and UNITY02 as the secondary. UNITY02 is the DC. In the above guide you have to reset the account that SQL Server Services logs on as to a domain account - On both the primary and secondary servers for Cisco Unity failover, you must reset the account that the MSSQLServer and SQLServerAgent services log on as. The account must be a domain account. However when you do this on the
DC then when that server reboots, the services will surely fail on start up as the domain accounts cannot authenticate to the DC - how can the service accounts log in to the domain if the DC hasn't started yet??
Re: Unity 5.x in a Voice Messaging Configuration with Exchange c
Have you tried it to see? What I am getting at is that this has been tested or it wouldn't be recommended or allowed/supported by bu and tac. It used to not be and they tried it out, tested it thoroughly, and decided it was a valid option. We have people who use this scenario for failover all the time and have no issues. We have lab setups like this that also work with no problems.
Is there a way in UCCE with using an admin script maybe using the email application in Call Studio to send out an email? I know in UCCX you can send out an email if the script were to fail but is there a way to do it in UCCE? Any help would be great!
Fun lab with Packet Tracer and running Cisco CME with 3 ip phones, 3 laptops, 1 switch, and 1 router. Fun lab with repetition. You will be able to test your phones and laptop for connectivity etc. Solution;see attached CME Packet Tracer L...
How to configure IP Address for Cisco Integrated Management Controller CIMC. The Cisco Unified Computing System (UCS) is a data center product composed of computing hardware, virtualization support, switching fabric, and management software.
QuestionHi Team,I just need to confirm if we change NTP servers on UCCX, will it affect the license on UCCX 12.0 ?Do we need to re-host after updating NTP?Already done on CUCM and CUC , and it didn't affect but not sure for CCX. Thank you ...