Unity Bridge/CallManager on Windows 2000 - DST 2007

[Ginger Dillon]

Hi all -

I know a document/alert is forthcoming from Cisco related to our voice applications and working with the Microsoft/Exchange updates for DST 2007. We also have CallManager running on Windows 2000. For either the bridge or CallManager, can we safely run tzedit on the servers? Does the Unity Bridge or CallManager have its own DST table, if we do apply the patch, or will Cisco be including some application level updates?

Thanks in advance, Ginger

[Erick Bergquist]

See this forum post I started the other day in IP Telephony forum:

http://forum.cisco.com/eforum/servlet/NetProf?page=netprof&forum=Unified%20Communications%20and%20Video&topic=IP%20Telephony&CommCmd=MB%3Fcmd%3Ddisplay_location%26location%3D.1ddd4852

In short (see other post for details), for servers using Cisco OS need OS 2000.4-3a SR8 or 2000.4-4sr2

There is ES patch for Call Manager also.

[Ginger Dillon]

Hi Erick -

Thank you very much for your response - this was an excellent forum topic! I hope someone else will comment on the pending Cisco alert notification and any specific updates needed for Unity or Unity bridge in addition to the MS patch.

Regards, Ginger

[Erick Bergquist]

Yea, I am hoping they do a patch for Unity other then TzEdit tool from MS. Would be easier IMHO.

[Erick Bergquist]

Here is the cisco doc on this.

http://www.cisco.com/en/US/tech/tk648/tk362/technologies_tech_note09186a00807ca437.shtml

Right now for unity, the cisco doc saids under investigation.

It saids to keep checking the doc as they update it.

[Ginger Dillon]

Cool - thank you for sending me the link. I have forwarded it to our network and telecom teams. I did apply the Exchange update 926666 on the Unity servers partnered to Exchange servers that had the correct store.exe version. Here's the forum post I opened regarding this - http://forum.cisco.com/eforum/servlet/NetProf?page=netprof&forum=Unified%20Communications%20and%20Video&topic=Unified%20Communications%20Applications&CommCmd=MB%3Fcmd%3Ddisplay_location%26location%3D.1ddd552b

Sincerely,

Ginger

[Erick Bergquist]

Thanks for the info on that...