05-03-2013 06:04 AM - edited 03-19-2019 06:41 AM
Hi All,
We are getting the below error while installing the new Subscriber on the Cluster .Every time near the "Installing Database Components "getting the following error .We have done media test in initial stage of installion and Successful .
Regards,
Nishad KI
05-03-2013 07:40 AM
We have installed the CUCM as Standalone server and it was successfull .So we can confirm that there is no problem with Hardware and Media .
Kindly let me know is there any other cause for the issue......
05-06-2013 12:51 AM
We have 4 callmanager in our Cluster ,One of the Subcriber is Shutdown,The Entry is not removed from the Cluster.
While installing the New subcriber we can see communcation is going to the Shutdown subcriber also in the firewall.
Is it an expected behavier ?
Do we need to remove the server entry from the cluster before install the New subcriber ?...
05-31-2013 03:11 AM
Hi All,
Issue is resolved
Workaround :
Do a skip install by skipping the configurationstep initially,Proceed with installation and the key in the configuration details when asked in the end
https://supportforums.cisco.com/thread/2128045
Regards,
Nishad KI
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: