upgarde call manger from v7.5 to 10.6

[mshah0002]

Dear All

i plan to upgrade our call mangers from v7.5 to v10.6 , please your recommendations on the below factors

plan

prepare

design

[Rejohn Cuares]

Hi mshah0002,

It is all in here: http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/docguide/10_5_1/CUCM_BK_C2CFB1F8_00_cucm-documentation-guide-1051.html

[Terry Cheema]

+5 to Rejohn.

I suppose you are on MCS and since CUCM 10.X is virtualized only deployment, which means you will also need to migrate hardware to UCS (or supported third party hardware), You can look at using PCD migration, below is the procedure for that:

http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/ucmapMigrate/10_5_1/CUCM_BK_M24251C0_00_migrate-procedure-for-cucm_1051.html

It also has a detailed MIgration Task List:

Migration Preparation Checklist

Before you begin, review the following information and ensure that you have met all of the requirements for the migration, which pretty much covers all:

• Licensing
• Compatibility Verification
• Virtualization Requirements
• Software Downloads
• Configuration and Login Information
• Cluster Registration
• Security Tokens
• Test Plan
• Cisco Unified Communications Manager Backup

• Licensing
• Compatibility Verification
• Virtualization Requirements
• Software Downloads
• Configuration and Login Information
• Cluster Registration
• Security Tokens
• Test Plan
• Cisco Unified Communications Manager Backup

Apart from that search this forum, you should find quite a lot of info on this topic.

-Terry

Please rate all helpful posts

[Aman Soi]

[+5] to Terry for great explaination.

you can also refer the link

http://www.cisco.com/c/en/us/support/docs/unified-communications/unified-communications-manager-callmanager/118318-config-cucm-00.html

regds,

aman