cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
405
Views
0
Helpful
4
Replies

Upgrade CUCM 7.1.5 to CUCM 10.5.1 with the traditional process

Hello;

I am needing upgrading from one CUCM cluster with 3500 users who are in version 7.1.5 to version 10.5.X, I can not use the product "Prime Collaboration Deployment" for the licensing of my VmWare in Bussines Edition 6000.


The question is whether I should first upgrade to version 8.X and then to 9.1 and then to 10.5X?

What would be the traditional process?

Thank You

4 REPLIES 4
Jaime Valencia
Hall of Fame Cisco Employee

The traditional method is the same as we moved to Unix appliance and is still available to the day.

You need to review the following docs

a. RNs

b. Compatibility guide for 10.x

c. Upgrade guide

ALL the info you would need to do the upgrade, pre-reqs, procedure and changes after the upgrade to the VMs are contained in those.

HTH

java

if this helps, please rate

ok, thanks, one more question to go from 7.1.5 to 10.5  should go first 8.6?

 

Thanks

Point b from my previous answer addresses that, the compatibility guide contains valid upgrade paths.

HTH

java

if this helps, please rate
Richard Simmons
Participant

Supported upgrade paths to 10.5.2 can be found here;

http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/compat/matrix/10_x/CUCM_BK_CD1DB914_00_compat_matrix/CUCM_BK_CD1DB914_00_compat_matrix_chapter_01.html#CUCM_RF_U4CE0DAF_00

As per Jamie's reply's you will need to read the release notes and upgrade guide before undertaking this.

Richard

Create
Recognize Your Peers
Content for Community-Ad