upgrade on CUCM Hangs ona certain spot in post install

[DavidPeter]

I have been working on upgrading the CUCM servers to this version 7.1.5.35112-2   from 7.1.5.34900-7

I was able to do this on the publisher with out a reboot and a switch version. So I am stable right now. Every time I try to do the install on the subscribers it hangs on this part

Calling sftp with arguments sftpuser@nix225

spawn sftp sftpuser@nix225

Connecting to nix225...

sftp> sftp> lcd /common/download

sftp> get /common/ontape_backup.gz

Fetching /common/ontape_backup.gz to ontape_backup.gz

Couldn't open local file "ontape_backup.gz" for writing: Permission denied

Looks like it is trying to write a file on the publisher nix225 not sure why it is doing this or if it is normal. Either way it is not able to pull and write to it.

Any ideas of what to look at with this?

I have attached the capture log as well.

[Ajay Singh]

Hi David,

You can have a look at this thread https://supportforums.cisco.com/thread/2107390 and see if this works. This thread is based on version 8.x

There is another error in logs "INFORMIXSERVER does not match either DBSERVERNAME or DBSERVERALIASES" hope all the hostnames exactly same passwords are also same

Ajay