10-10-2013 01:04 AM - edited 03-19-2019 07:23 AM
what all are the procedure for upgrading callmanager BE 6000 upgardation from 8.5.1 to 9.1. We have publisher and subscriber.Please let me know how it can be done.
Ameen
Sent from Cisco Technical Support iPhone App
Sent from Cisco Technical Support iPhone App
10-10-2013 07:18 AM
Upgrade procedures have been discussed thoroughly in CSC, your first step is to review the install and upgrade guides for CUCM 9.1, along with the Release Notes, all available upon search on cisco.com. Or, under cisco.com -> support -> Product Support -> all products, and then browse to CUCM.
You can also do some further reading from the D29 material
https://communities.cisco.com/community/partner/collaboration/migration?view=overview
HTH
java
if this helps, please rate
www.cisco.com/go/pdihelpdesk
10-10-2013 08:09 AM
Can we upgrade directly from 8.5.1 to 9.1.2 .when i tried its it not upgrading.do we have any other procedure
Sent from Cisco Technical Support iPhone App
10-10-2013 12:08 PM
Have you reviewed the SW compatibility matrix???
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/compat/ccmcompmatr1.pdf
HTH
java
if this helps, please rate
www.cisco.com/go/pdihelpdesk
10-20-2013 11:57 PM
Thnks ..i had to do refresh upgrade
Sent from Cisco Technical Support iPhone App
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: