This VG 224 is right out of the box and during the booting it displays these errors.
% Crashinfo may not be recovered at flash:crashinfo
% This file system device reports an error
Then when I tried to take a look at the flash it displayed
Router# dir flash
%Error opening slot0:/flash (File not found)
Does anyone know how to get rid of this error?
try dir all and see if it makes any difference.
You can also try to format your flash: put again the IOS into it and set the appropriate boot system command.
Please rate all helpful posts
"The more you help the more you learn"
thanks for the info but I did try that and I found this
It does not affect any functionality of the router. It only cautions the user about unrecoverable crashinfo, so that user may configure other modes of collecting the Crashinfo.
exception crashinfo file slot0:crashinfo
Crashinfo would be written to the slot0 if the router crashes in the future.
Can you please post the output of a show file systems?
Sent from Cisco Technical Support iPhone App
The VG 224 does not have flash instead it has a slot, which is termed as slot0: the error generated is due to VG crash.
Hence the the crash file is in slot0.
To retrieve the same,the following command can be used :
This should work.
Kindly rate the post accordingly.
Sent from Cisco Technical Support Android App