voice gateway port reports

[Ted S]

Hi,

I was wondering if anybody has a way of gathering all the gateways configured along with which ports were configured.

For example a VG202 with port 0/1 configured with x1234 but port 0/2 is not configured.

Thanks in advance,

Ted

[Jonathan Schulenberg]

Assuming a modern build of CUCM and that the equipment is built as SCCP or MGCP since you didn’t provide any qualifiers.

Run a BAT export:
https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/bat/11_5_1/CUCM_BK_B4FA1139_00_bulk-administration-guide_1151/CUCM_BK_B4FA1139_00_bulk-administration-guide_1151_chapter_0110100.html
or
https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/bat/11_5_1/CUCM_BK_B4FA1139_00_bulk-administration-guide_1151/CUCM_BK_B4FA1139_00_bulk-administration-guide_1151_chapter_0111110.html#CUCM_RF_E7E5069E_00__section_99DEE013960D4B01962CA08D0F9205...