07-22-2020 11:16 PM
I am trying to get a basic voicemail to work by following along with a couple of examples. I only get a busy signal when I call into it. The voicemail system says I don't have enough licenses. I also just noticed that I need to set the date. Not sure if that is related...
Oct 23 00:49:37 localhost java: ERROR ccn ManagerContact DBUG CONTACT_ADD_CHANNEL_ERROR:Could not add a channel to a contact: Contact=SIPCallContact[id=9,type=Cisco SIP Call,implId=C38B6A3-CBD711EA-95B5966A-19A3D4D3@10.0.0.229,active=true,state=CALL_RECEIVED,inbound=true,handled=false,locale=en_US,aborting=false,app
Oct 23 00:49:37 localhost java: ERROR ccn ManagerContact DBUG EXCEPTION:com.cisco.channel.ChannelLicenseViolationException: license limit exceeded for application type: AAWorkflowPrivilege
Oct 23 00:49:37 localhost java: ERROR ccn ManagerContact DBUG EXCEPTION: at com.cisco.contact.impl.ContactStubImpl.addChannels(ContactStubImpl.java:1740)
Oct 23 00:49:37 localhost java: ERROR ccn ManagerContact DBUG EXCEPTION: at com.cisco.channel.impl.ChannelManagerImpl.getIdleChannels(ChannelManagerImpl.java:991)
Oct 23 00:49:37 localhost java: ERROR ccn ManagerContact DBUG EXCEPTION: at com.cisco.channel.impl.ChannelManagerImpl.getIdleChannels(ChannelManagerImpl.java:704)
Oct 23 00:49:37 localhost java: ERROR ccn ManagerContact DBUG EXCEPTION: at com.cisco.channel.Group.getIdleChannels(Group.java:391)
Oct 23 00:49:37 localhost java: ERROR ccn ManagerContact DBUG EXCEPTION: at com.cisco.channel.Group.getIdleChannels(Group.java:345)
Oct 23 00:49:37 localhost java: ERROR ccn ManagerContact DBUG EXCEPTION: at com.cisco.wf.subsystems.callcontrol.AppRoutePointCallListener$1.run(AppRoutePointCallListener.java:286)
Oct 23 00:49:37 localhost java: ERROR ccn ManagerContact DBUG EXCEPTION: at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:776)
Oct 23 00:49:37 localhost java: ERROR ccn ManagerContact DBUG EXCEPTION: at java.lang.Thread.run(Thread.java:595)
Oct 23 00:49:37 localhost java: INFO ccn SubsystemSip DBUG ROUTE_EVENT:Call Control group route event: Route Session=null,Route Address=4500,Failure reason=Reject Call-onCallConnectionOfferedEv-Call=[RoutePoint=4500 GCID=C38B6A3-CBD711EA-95B5966A-19A3D4D3@10.0.0.229 From=2074 To=4500 Connection=[SIP-Conn-18, dn=4
Oct 23 00:49:37 localhost java: INFO ccn SubsystemSip DBUG EXCEPTION:com.cisco.channel.ChannelLicenseViolationException: license limit exceeded for application type: AAWorkflowPrivilege
Oct 23 00:49:37 localhost java: INFO ccn SubsystemSip DBUG EXCEPTION: at com.cisco.contact.impl.ContactStubImpl.addChannels(ContactStubImpl.java:1740)
Oct 23 00:49:37 localhost java: INFO ccn SubsystemSip DBUG EXCEPTION: at com.cisco.channel.impl.ChannelManagerImpl.getIdleChannels(ChannelManagerImpl.java:991)
Oct 23 00:49:37 localhost java: INFO ccn SubsystemSip DBUG EXCEPTION: at com.cisco.channel.impl.ChannelManagerImpl.getIdleChannels(ChannelManagerImpl.java:704)
Oct 23 00:49:37 localhost java: INFO ccn SubsystemSip DBUG EXCEPTION: at com.cisco.channel.Group.getIdleChannels(Group.java:391)
Oct 23 00:49:37 localhost java: INFO ccn SubsystemSip DBUG EXCEPTION: at com.cisco.channel.Group.getIdleChannels(Group.java:345)
Oct 23 00:49:37 localhost java: INFO ccn SubsystemSip DBUG EXCEPTION: at com.cisco.wf.subsystems.callcontrol.AppRoutePointCallListener$1.run(AppRoutePointCallListener.java:286)
Oct 23 00:49:37 localhost java: INFO ccn SubsystemSip DBUG EXCEPTION: at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:776)
Oct 23 00:49:37 localhost java: INFO ccn SubsystemSip DBUG EXCEPTION: at java.lang.Thread.run(Thread.java:595)
Oct 23 00:49:37 localhost java: ERROR ccn StackSip DBUG ##### ltp16-4500, State=DISCONNECTED: ##### [SIP-Local-MT-17 dn=4500 no media] ##### [SIP-Remote-MT-16 dn=2074 media=10.0.0.229:16472, mediaStarted=false]: ##### ltp16-4500, State=DISCONNECTED: ##### [SIP-Local-MT-17 dn=4500 no media] ##### [SIP-Remote
I tried to change the maxsessions, thinking it was worth trying a lower value. I get a license error here too.
kz-vm(config-trigger)# maxsessions 2
Warning: session value exceeds license limit
kz-vm(config-trigger)# maxsessions 1
Warning: session value exceeds license limit
Solved! Go to Solution.
07-24-2020 08:06 AM
if you are not using IVR deactivate it using the command no license activate ivr sessions.
And go through the below link. it explains in details about how to activate the license in CUE both evaluation and permanent.
https://community.cisco.com/t5/collaboration-voice-and-video/cue-licensing-faq/ta-p/3124290
07-23-2020 05:13 AM
can you post the output of show license
07-24-2020 06:27 AM
# show license
Index 0 Feature: VMIVR-VM-MBX
Period left: 4 weeks 5 days
License Type: Evaluation
License State: Active, In Use
License Count: 600 /5
License Priority: Low
Index 1 Feature: VMIVR-PORT
Period left: 4 weeks 6 days
License Type: Evaluation
License State: Active, In Use
License Count: 60 /2
License Priority: Low
Index 2 Feature: VMIVR-IVR-SESS
Period left: 5 weeks 4 days
License Type: Evaluation
License State: Active, In Use
License Count: 60 /2
License Priority: Low
07-24-2020 08:06 AM
if you are not using IVR deactivate it using the command no license activate ivr sessions.
And go through the below link. it explains in details about how to activate the license in CUE both evaluation and permanent.
https://community.cisco.com/t5/collaboration-voice-and-video/cue-licensing-faq/ta-p/3124290
07-24-2020 08:49 AM
Thank you! That fixed it.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide