The Cisco UCS Diagnostics software for Cisco UCS Blade Servers enables you to run tests on the hardware and verify the health of the components. The tool provides a variety of tests to exercise and stress the hardware subsystems on Cisco UCS Blade Servers. These tests can be run through the tool GUI or a CLI.
The subsystems it can test are
Storage (servers with MegaRAID controllers)
You can use the tool to run regression tests on the Cisco UCS Blade Servers after fixing or replacing hardware components. You can also use this tool to run comprehensive burn-in tests on Cisco UCS Blade Servers before deploying them in production environments.
Don't miss the Customer Connection roadmap session happening Thursday, April 22 at 7 am PT.
This NDA session from the Cisco Data Center product management team will share the roadmap for the Cisco Hyperconverged Infrastructure solutions. They'll highligh...
Need to replace a CPU on a UCS C240 M4 server as per https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/c/hw/C240M4/install/C240M4/replace.html#45480. However, the CPU that was delivered doesn't have the CPU plastic frame. So I'm n...
We have deployed a new UCS and ACI fabric and have noticed some odd behaviors in respect the presence of the MAC address that is assigned to FIA showing up on the port-channel designated for FIB. The connection is simple, VPC between 2 leafs to each...
1.What are the question to be asked before creating BOM for UCS B200 M5 server?2.Is it necessary to select operating system while ordering the B200 M5 server? Or is it optional?What is part id for ESXi 7?
Hello Everyone, We recently tried to update a UCS ESXi 6.0 to 6.5. When the server was restarted it did not go back up and remains in shell mode. Try to change the priority of boot but the disk arrays are not displayed. She...