Unified Computing System Discussions

I've got some C220-M5's running 4.0(4c) firmware with a fresh install of vSphere 6.5U2 (Cisco custom). Also using VIC 1457. I'd like to use the 2 onboard 10Gbase-T ports for management traffic on the ESX hosts. The problem is that only the 4 MLOM (VI...

Hi, The default password has been picked up on a vulnerability scan.  How can I change this, or delete the account and replace with a new admin account? Thanks 

Helloafter upgrading the UCS Central to version 2.0(1j), I can't use the "set-ucscentralserverpower -ServiceProfile $Serviceprofile -State up -Force" command via UCS Central PowerTool.Always get the error:"set-ucscentralserverpower : Config server po...

We have discovered that sometimes UCS Server firmware doesn't always install properly.  When you look at the server firmware, it displays sometimes like this;Firmware Version3.1(2f)C,3.2(3i)C Now we have track some of this down to human error.  When ...

Hello community,I need help with information, i have a HBA "Emulex LPe31002-M6-C", i need to know the release date and if possible (pdf) of the next Firmware version for interoperability (Red hat 6.9 x64) with hitachi g400.12.0.193.1312.0.193.22I fou...

Hi all:Recently was checking an UCS 240m3 remotely via ssh to the CIMC.Found these entries on the Fault History and want to know If its time to change the BBU?04/11/2019 23:01:34 raid-battery cleared04/11/2019 22:59 F0997 raid battery Or is normal th...

Hi, Our UCS servers partitions are reaching capacity. Need assistance in recovering partition space, these are virtual machine on VMware.  Can anyone provide the best practice procedures for increasing the disk space and if possible the documentation...

I upgraded the FI and USCM and now i'm not able to access anything. My FI are pinging and i'm able to access them but i'm only given three options in the CLI. I can no longer access the USCM from the web. Is there a way i can load my back up that i t...

Hello team, I apologize if this is RTFM question bu t I was unable to find the proper documentation I have a customer who has several rack servers connected to a FI through a pair 2232PP FEX. They recently upgraded the FIs and all the servers lost co...

Hello,Could someone clarify what problem I may have with the following configuration, in my VMware environment I have two dedicated VM traffic vNICs and we are using the failover option inside UCS in VDS both vNICSs are active at first everything see...

Issue:Affected object : sys/chassis-2/blade-7/bios/fw-updatableDescription : backup image is unusable. reason: unknown-errorID : 695042Type : managementCause : image-unusable