Unified Computing System Discussions

Deployed UCS Central 1.3(1b). Successfully registered one domain.The registration of the 2nd domain got stuck. (see screen fsm_status.png)************Repair State: DoneRegistration Status: RegisteringFSM Status: In ProgressCurrent FSM Name: Register ...

Hello, We have Cisco UCS B-series. UCS Manager and KVM Manager are working fine. But when I enter Out-of-Band IP to access server directly (Cisco UCS KVM Direct), it says "Connection timeout". How can I resolve this. Thanks.

Hi all,UCS Manager in UCSPE 2.2(3c) shows fault , "DIMM on server has an invalid FRU "I know how to fix the problem . needs to upgrade the version of the capability catalog  .what version of capability catalog i can upgrade with UCS Manager in UCSPE ...

Been a UCS customer for 5 years.  Here's my problem. We initially got deployed by CDW for VMware and the person didn't create a template as you know it, just a service profile with updating components.  Then we clone off of that SP.  When I add new V...

We have 3 nos. of 5108 Chassis with 24 nos. of B200 M4 blade servers connected to 2 nos. of 6248 UP FIs.  Uplink from both FIs are connected to 2 nos. of Cisco N9K switches in vPC mode. There will be large no. of VMs on blades and these VMs will have...

I have to shut down parts of my network due to an electrical outage this weekend. I have a Cisco UCS 6100 Server Fabric Interconnect. I am trying to backup the configuration. This is the command I am using create backup tftp://*.24.1.88 full-state en...

In the compatibility matrix, the highest level of vSphere for the B230-M1 is vSphere 5.5 u3. I am running in a test environment, vSphere 6.0 u2. Anyone know if official support for vSphere 6.0 will be available on the B230-M1 servers?

I have tried to build 8 gigabit port channel between Cisco 6248 interconnect and MDS 9509 FC switch.  Port Channel on MDS director build correctly but when I try to join it to port channel on 6248 it fails...

When trying to connect to a CIMC, I receive the following error. I haven't found anything on this error. C:\> Connect-Imc XX.XX.XX.XX Connect-Imc : Connect-Imc: XX.XX.XX.XX :Invalid CIMC.At line:1 char:1+ Connect-Imc XX.XX.XX.XX+ ~~~~~~~~~~~~~~~~~~...

Hi, I have a question about the best practice to design this environment Today i have a Netapp using FCoE connected to two Nexus 5500 and some UCS Rack server. Now i have to configure a UCS Mini and i don't know the the recommended configuration, b...