Unified Computing System Discussions

Hi Everyone, Hope you all are fine...! I am little confused about various cards and their working in cisco B-series servers. Anyone can tell me the proper differences and hardware placement of Cisco VIC card, mezzanine and mLOM card? Thanks  Regard...

UCS-E140S-M1 + 2921 router So I had some issues accessing my servers recently in my test environment and realized the KVM interface (either Java or the physical keyboard) would not take any keyboard input anymore... Impossible to go to BIOS settings,...

Hi All,     Need to address the defects raised as part of the STIG compliance on CSR 1K Router.     Please guide me to a location (URL/Anything) where i can refer for proper inputs in resolving the defects.     Tool used for generating STIG Complianc...

Hi, Could I use the QSFP port in UCS MINI FI 6324 as uplink port to connect to either QSFP port in Nexus switch or 4 x 10 Gbps SFP+ in Nexus switch?

Hi, Can any one provide URL on step by step documentation (with snapshot) on configuring VSAN and VLAN on UCS 5108 Chassis. Regards,

HP already has the custom image as of September.  When can we expect one from Cisco?http://h18004.www1.hp.com/products/servers/software/vmware/esxi-image.html

Hello.We have some B200M4 servers connected to 2xFI6248. Both FI6248 are connected to 2xNexus 5548 via 2 vPCs. vPCs are in trunk mode with access to couple of VLANs.B200M4 server profiles contains 2 vNICs each virtually connected to separate FI.I've ...

Hi, For new implementation, Can I associate the same service profile to B200M3 and B200M4 on the same chassis or I must have 2 different service profiles ?  if we must use different SPs. what is the difference between them ? And for migration proce...

Hi All, Can someone shed some light to my issue? I installed windows 2012 R2 on a Csico C240 m3 with a Raid 10 of 6.8TB but windows only see 2.2TB. I have tried to made some changes in the Bios but still unable to see all the 6.8TB Partitions. BIOS ...

We're using ESXi as the hypervisor and VM-FEX as the virtual switch in our UCS environment.  Recently I wanted to capture all traffic to/from a virtual machine and learned that I'm a bit limited on what I can do.  The Traffic Monitoring feature on UC...

Hello,Is Open LDAP integration supported with UCS Manager? Please let me know. Thank you!Best Regards,

Error: Timed out communicating with DME when ssh'd into the fabric interconnect Also, I can't login to UCSM with the same password as the ssh

Hello Folks, There is my configuration :  1x UCS UCS-5108    4x UCS B200 M4 (1x VIC 1340)    2x UCS 2204XP (4x FET-10G) 2x 6248 (8 FEX-10G to chassis) each 6248 will have 2 10Gb uplink to two cisco 6800 (in vss)  We will install windows 2012 bare Me...