Unified Computing System Discussions

Has anyone else experienced a very marked performance decrease following a Java update?I've gone from Java 7 Update 45 UCS system manager firmware is 2.2 (1D) so the old access issue is not present, to Java 8 Update 25 and it works but is painfully s...

Hello,I have a UCS240-M3 that I upgraded to 1.5(3).  Now an alarm for the flexflash is slowly driving everyone crazy, but I see no way to turn it off, or even turn the alarm off.I don't use flexflash so I'm willing to yank out whatever it is in there...

Hello everyone,I have a problem with Global Service Profil association from UCS Central.After creating all my Global Pool/Policie/SP-Template i create a SP from my Template (from here no prob)When I associate my SP with a Blade I have a fail in the s...

Hi what is the significance of "Burst(Bytes)" and "Rate(Kbps)" in the QOS policy? Should I leave it to defaults or change the values.Thanks

Can you put a 16gb SD card in a B440 m2 and use this SD card for VMware auto deploy stateless caching? Thanks

Hi team, Could you please let me know where i can download training videos  for UCS servers B series  Regards,Nishad

  Our older chassis have 5108 power supplies.N20-PAC5-2500W  The newer chassis have 6508 power supplies.UCSB-PSU-2500ACPL We just plugged in the two new B420 blades and within two hours we are getting thermal faults. What is the difference between th...

Recently we got few new C240 M3S2 Rackmounts from Cisco. Those came with 2.0(1b). We want them to downgrade to 1.5(4e).We used hostupgrade utility and selected to downgrade CIMC and BIOS.   CIMC downgraded successfully, BIOS successful message we did...

Hi, I am trying to configure boot from san for a UCS C220 server with a qlogic qle2562 fc hba.When the server boots i should be able to press ctrl-q and enter the hba utility, but ctrl-q does not appear.I am able to see the adapter in cimc and I also...

Hi,The latest version of UCS Central came with "Authentication domains" support.When I create domains in UCS Central, and then tell UCS Manager to inherit those settings, they are not created in UCS Manager? Am I missing something here? /Jerry

Hi,I am planning to upgrade our UCS B-Series server(B200M2) to 2.2(1d) from 2.1(1d).While i was reading the Cisco document for the upgrade, they were specifying about a bug CSCuh61202 ( https://tools.cisco.com/bugsearch/bug/CSCuh61202 ) .It is saying...

We have been running a few of these servers with only a 500GB 6GB SATA 7.2K drive installed with all VM's (Hyper-V) sitting on an attached SAN. For various reasons we needed some local storage on the server and installed 2 1.2TB SAS drives (10K 2.5")...