Unified Computing System Discussions

i have a number of ucs c220 m3's deployed with 2 flexflash cards in them.  until recently we weren't aware of the need to conduct the hypervisor sync thru the SCU (http://www.cisco.com/en/US/docs/unified_computing/ucs/sw/ucsscu/user/guide/314/gui.htm...

HiWe’ve a problem with the new server UCS C220. We bought two servers UCS C220 M3 for CallManager 8.6 with High Availability. When we turn on the server during the boot and when it tells us, oppress F8 to enter at the CIMC and set the IP. But it neve...

      I have configured the Boot Order to point to a specific target for vHBA0 (Primary) and vHBA1 (primary), assigned it to an "Updating" Service Profile template, then create the service profiles from the template. Works like a champ.Now for the wr...

Hi all,I want to ask support Windows OS for Blade M200 B2 server ?whether support windows 2012 OS ?thanks for all .shendy

Hi Expert,i have two n5k and two 6140 FI and four 2148 fex and my ucs manger v is 2.0,please let me what is best practice to connect c series server in this enviroment so that i cam manage my c series servers from UCS and they can alos see my EMC lun...

                   < V2.2.1b, there was a limitation, that FI out of band and VIP PLUS KVM IP addresses had to be in the same IP subnet, Vlan.I assume, that now with in-band KVM management (2.2.1b), this limitation no more exists. can someone please ...

Hi,I was wondering whether is possible to connect a tape library using FC directly to an FI 6248 in FC Siwtch mode.Thanks

I think that a UCS Upgrade from to 2.0.4b to 2.2.1b is possible in one step, eg. upgrading first UCSM, and then go with autoinstall for infrastructure and servers ?http://www.cisco.com/en/US/docs/unified_computing/ucs/sw/upgrading/from1.4/to2.2/b_Upg...