Are there any advantage to upgrade from 2.0 (1t) to 2.1 ucsm?
Are there any advantage to upgrade from 2.0 (1t) to 2.1 ucsm?
I was wondering what people are doing when creating service profiles for esxi. Are you creating a single service profile for each esxi server you deploy or are you using a template and then creating service profiles from that template?Also what is th...
Hi everyone,my client requested me to quote/recommend a ucs server that can do vitrualisation of up 20 vitual machines(VM). Please which model of c-series server can i recommend?please share with me the part number or possibly the ...
Hi,I Have a C220M3 with the LSI MegaRAID SAS 9266-8i controller. I used the MegaRAID utility to create a RAID volume, which shows up as virtual drive 0 in CIMC. My ESXi 5.0.0 installation (on flex flash) does not recognize this volume and I cannot us...
Hello, I'm in the middle of my first UCS deployment and I'm having a hard time understanding how to configure a boot from SAN policy that offers HA. The primary SAN boot vHBA is connected to FAB-A and points to the NetApp FC port connected to FAB-A a...
does anyone did ever change the san boot disk to its replicated LUN? i have a requirement to move my present SAN BOOT lun to the replicated LUN any thoughts how i can achieve this? thanksGGAJULA
HiI have SFP-LH-SM in eth1/1 in Nexus5548UP but I have problem to get LINK on eth1/1.I have SFP-LH-SM in eth1/1 in another Nexus5548P and it is not problem to get LINK with same configuration of eth1/1Is there some special setting for Nexus5548UP?Is...
I zoned in my wwpn on the fiber switches but the array is not seeing the wwpn. Is there anything that needs to be enabled on the bios of the blade server?Boot orer is cdrom and then san boot
I have a C200 M1 running 1.4(3p), I am noticing some performance issues with this server, it just seems slow. I went to it physically and you can hear the PSU fans spin up and slow down every few seconds. Within an SSH to the CIMC I am seeing both ...
Hey,Is this still supported in UCS 2.0 with the new 6100 with "unified ports"?
for each blade, we have 2 vnics assigned to the server. one vnic to fexA and one vnic to fexB. then i create only 1 vswitch and assign both vnics to this vswitch.then all port groups are under this one vswitch.question is it better to create more vni...
Hi,I do not undersand the assigment order for IP pool, Mac @ Pool, WWN pool....Sometime it seems logical :for example : MAC pool 00:25:B5:41:0A:00 to 00:25:B5:41:0A:3F, the server 1_nic1 get 00:25:B5:41:0A:3F, the server 1_nic2 get 00:25:B5:41:0A:2F....
Hello,I do not understand the advantage(s) to use a host firmware policies.It seems to me that it is more flexible to upgrades endpoints for each server with apply a maintenance policy "Uer Ack" in order to get "Pending Activies" for servers which ne...
I see this under license management, general. and grace perios 120days. what does this mean? Also I do not see anything intalled under licenses. Does this mean I cannot use vm fex or 1000v?
Hi,I have two UCS C220 M3 server in my environment, one is working swimmingly while the other are struggling with problems.When we boot the problem's UCS, through console we can access the UCS BIOS & CIMC config utility. We're able to enter the IP ad...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
04-23-2024 12:18 AM | ||
04-16-2024 02:26 AM | ||
04-04-2024 11:22 AM | ||
03-18-2024 06:52 AM | ||
02-27-2024 07:34 AM |