FI : 6248Chassis : 5108Blades : B200 M2 x 2Uplinks : 5548UPI'm setting up a pretty standard UCS deployment and have VPC uplinks from the 6248 fab interconnects to Nexus 5548s. The uplinks appear to be working correctly as I can manage UCS without any...
We are in the process of deploying our B-Series with dual 6120's and dual Nexus 5010's. My first question is on the LAN uplinks. I would assume I would create a VPC on the 5K's to 6120's but my question is would I use a VPC for each 6120 connected ...
Please could someone assist in answering these question for me, I keep hearing conflicting information:1 – New VIC cards support 256 vnics, why do I keep seeing 116 vnics? (Is this is an OS limitation)2 – Is it correct that with the new gen2 hardware...
I have a quick question that I've not been able to get a definitive answer to (in the documentation) - in relation to the new 6200 FI's and FCoE northbound..Anyway, my question: With the UP feature on the 6200's (with UCS 2.0) - can we now do FCoE...
I get an error "No free port available in DVportgroup x" when I add the 33rd host to 1kV. I know the max limit is 64 hosts.What could be wrong?
Is it possible to integrate the C series rack mounts (particulary C250 M2) with UCSM without using the 2248 for management as per this article for the C200 http://www.cisco.com/en/US/docs/unified_computing/ucs/c/hw/C200M1/install/ucsm-integration.htm...
Hello,Is dot1q supported on the 6248 Interconnects? We have a few 3750's and we have FC connected from the 3750's to the interconnects with the following configuration:Int gx/x/xSwitchport mode trunkSwitchport trunk encap dot1qSwitchport trunk allowe...
Hi All,We run a number of UCS pods of Windows Server and RHEL Linux B200 M2/B230 M2 Blade hosts on 1.4 (3m) & 2.0(2q) firmware.We do patching runs quite regularly via a scheduled job on each blade server.It seems that a simple reboot does not trigger...
Hi,i ve to change "max-ports " in a vethernet port-profile. Does this command cause a disruption on other VMs?Nexus 1000v version 4.2(1)SV1(4)Thanks!Andreas
Can a KVM be directly connected to?I know there is the nice "Launch KVM Manager" setup. But have a client would just like to give URL's to their KVM's and keep their awareness of UCS "limited". URL's to their KVM's would be ideal. I tried the below a...
Hi all, I have two questions:1. Does the 6248 support SFPs such as a GLC-T?2. I am aware that the 6428 support two upstream layer 2 domains by pining certain VLANs to port groups which are attached to differing layer 2 domains, but does this princip...
Can I perform an firmware upgrade using the UCS emulator?
HII have added a new vLan nic and added it to the blade server but I don´t get any connection to the network. Do I have to initate it in the fabric switch or any where else? Iám rather new to the Cisco UCS environment so basic how do I do to add a ni...
1.4(4f) has a later release date then 2.0(2q). Are both being actively being upgraded? Which release are we supposed to use?
Hi Guys,I just want ot know if there is way to take Service Profile Template and look at all the service profiles associated with it from GUI or CLI.Right now I have to go and look at each service profile and see which template it is binded to.So w...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
| Subject | Author | Posted |
|---|---|---|
| 12-03-2025 07:07 AM | ||
| 11-30-2025 06:22 PM | ||
| 09-23-2025 12:33 PM | ||
| 09-09-2025 06:54 AM | ||
| 09-05-2025 12:03 PM |
