Unified Computing System Discussions

Resolved! UCS VIC (PALO) - Associate a host

Hello,I have a blade server with the PALO (VIC) adapter and I am testing the VN-Link in hardware feature ...I have configured everything as per the Cisco UCS Configuration Guide - VN-Link Configuration sectionOn the ESX host I can see the 2 vNICs I c...

Qs about UCS

Hi,I have a couple of questions for all of you. I have not seen something similar here, so that is why I am posting...1. When I am creating vNIC, I have a option to chose should traffic go through Fabric A or B. I also have a pin group as a option. S...

blade to IO module port for B-250

Hi, If I have 4x10GE to the Fabric interconnect, The blades (B200) are hard wired to use the 4x10GE connection in the following manner -Blade1 – IOM link 1 -Blade2 – IOM link 2 -Blade3 – IOM link 3 -Blade4 – IOM link 4 -Blade5 – IOM link 1 -Blade6 –...

configure vPC-HM for Nexus 1000v onUCS

Hi guys,Evnironment: UCS 5108 chassis with two FI, Nexus 1000v on ESXi 4 on two B200, M71KR CNA.I am following this cisco paper:http://www.cisco.com/en/US/prod/collateral/switches/ps9441/ps9902/white_paper_c11-558242.htmlmy previous experience, you n...

Resolved! Palo

Hi.. We will be receiving our new blades with Palo card and i am reading up the documents to prepare for the installation. Based on what i read in CCO, Palo is doing VN link in hardware. This means that switching is done at hardware at the Fabric I...

Resolved! VTP on UCS?

Hi all,I need to create about 100 vlans on the UCS fabric interconnect cluster uplinking to nexus 7K, couldn't find a way get UCS to learn vlans using VTP or something like that. I prepared the command list to run with in CLI, which is still a lot of...

Resolved! Windows 2003 Palo (VIC) Drivers

Anyone know if there is a Windows 2003 VIC driver? I fond the Windows 2008 x64 one on the UCS Downloads page.

UCS -> Nexus5000 -> FC Storage

hi all,is it possible for Nexus5k to operate as the only SAN switch (FC) between a UCS and a FC EMC Storage with no other MDS switches used?to better clarifly my question Storage | | ...

Service profile mobility

Can service profiles be moved from different UCS management domains? If I have UCS manager A-domain in one datacenter and another UCS manager B-domian in another datacenter, can a service profile be moved easily to from one to another during a DR fa...

Resolved! Cisco UCS Blades ¦ smbiosDump command returns "undefined, but settable"

Hello Community -I have installed ESXi on a UCS B-Series Blade but have been unable to enumerate the UUID (set via Service Profile) with the smbiosDump ¦ More command.All other fields return correctly for Serial Number, etc... but not UUID. UUID retu...

Configuration MAC derivation virtualized port - profiles

Having issues getting service profile to apply to blades. I have a MAC pool defined, but it did not ask me for this when creating template for serv profile. Any ideas on how to get this template applied to a server pool?

Multiple Raid Settings on a C-Series Server

Is it possible to run the below Raid Configurations on the same C-Series Server?Raid 1: with 2 HDDRaid 5 with 3 HDDI know it is not possible on the C200 due to lack of HDD Slots, but is it possible on the C210 or C250.Regards

Cisco UCS Blade Hardware - How to set Hostname?

Hello Community -How does the Cisco Blade(e.g., 6100) set the Hostname? In the BIOS, the field is set to "unknown", and is not changable.Within an HP Server, there is the possibility to set hostname via Asset Tagging in the BIOS itself.IHAC who is ...

Cisco UCS Manager - API Model Documentation and the APE

First question is "cheeky-monkey-ish" but I'm interested so here goes:(1) Is it possible to find an official/unofficial download location for the APE (Cisco USCS Application Platform Emulator)(2) Second, I keep seeing a AWESOME HTML-based UCS Mode...

Failed Drive on chassis

I have a light indicating a failed drive on the UCS. I can't seem to find the same indication on the UCS Manager. Where should one look to find a drive failure? I've looked through and everything appears normal.

Unified Computing System Discussions

Forum Posts

Resolved! UCS VIC (PALO) - Associate a host

Qs about UCS

blade to IO module port for B-250

configure vPC-HM for Nexus 1000v onUCS

Resolved! Palo

Resolved! VTP on UCS?

Resolved! Windows 2003 Palo (VIC) Drivers

UCS -> Nexus5000 -> FC Storage

Service profile mobility

Resolved! Cisco UCS Blades ¦ smbiosDump command returns "undefined, but settable"

Configuration MAC derivation virtualized port - profiles

Multiple Raid Settings on a C-Series Server

Cisco UCS Blade Hardware - How to set Hostname?

Cisco UCS Manager - API Model Documentation and the APE

Failed Drive on chassis

Hearty congratulations to the December Spotlight Award winners!

Renew.cisco.com just got refreshed, and it will make your life easier!

Announcing Resources That Guide You to Success

UCS blade chassis network error

Export from 6248 Fabric Interconnects and import to 6454 FIs

Help, i have a question about Vlans overlapping different vlan groups

B200 M5 Stopped During Boot.

show int Vethernet time interval

Unable to upload SSL

UCS - B200 M3/M4 - Local Disk Configuration

Managing vNICs and vHBA's

Compatibility query

UCS Port Channel LACP policy