Unified Computing System Discussions

Hi folks,I experienced a UPS failure which dropped one of my C210 M2's. It came back up fine, ESXi fired right up and it's successfully hosting several VM's so everything appears to be technically operational. However, in the CIMC my inventory screen...

So I have two questions here that are interrelated regarding storage and unified computing in a nexus 7k environment, I’ll focus on the UC portion for now but feel free to chime in on the storage concern as well.The way we have it set up today is phy...

Having been booting from SAN and not always loving it, wondering how others feel about iSCSI boot in 2.0? To me this is a game changer. WAY EASIER. Is anyone doing it? Feedback?Craig

Hi,Need suggestion whenther we need to go for Upgrading Cisco UCS from Release 1.4(2b) to Release 1.4(3): Currently we are running 1.4(2b) on Cisco UCS. However 2 interfaces were showing as "Admin Down" on Fabric Interconnect even after several attte...

heres my scenario, we are running BM installs of Windows 2008 R2 x64 SP1 on B200 M2 blades (with M71KR-E CNAs). Now, the installs are streamed PVS images and are run exclusively in RAM. We ran into some difficulties with event logs, crash dumps etc s...

VN-Link in hardware is implemented on UCS using the PALO adapter using VN-TaggingCan the Nexus 1000v also tag traffic with a VN-Tag in the case where non-Cisco servers are used?

Is there any way to capture failed logon attempts in UCS? I see allowed logon attempts in the audit log but can't see a way to track failed ones.Thanks,Simon

This has happened twice so far, where one of the CIMC in one of my C200's would start continually rebooting. It will do this for a couple of hours or so and then finally stop. Afterwards everything appears to be fine and I can't find anything in the ...

i already had one subnet with /24 which is configured and working fine in one of my ucs setup .we are having a few ips in this setup .i want to know how to configure one more /24 subnet in this ucs setup with out affecting the existing setup .Because...

What type of question in this exam. Simulator or multiple choice question?Any link of study material.....Please helpme...

Hi community,I am currently working with the Cisco support on this but since this won't progress for a couple of days I thought it can't hurt to ask around the community and share my situation.I have a UCS system with two FIs connected via one 1GB Up...

Installed 4 chassis system and chassis 1 is throwing up the F0411 constantly,  Fault Code: F0411 ID 93440 chassis-1 thermal temperature on chassis 1 is upper non recoverable.  This customer has B250-M2 full width blades in all chassis.  This chassis ...