Hi,I am looking for best practices or steps to enable Jumbo frames on running Cisco Hyperflex cluster with production VMs running on it.From Cisco UCS & ESXi perspective I can enable jumbo frames. However, I am not sure if enabling jumbo frames on al...
Hi,this is my first post here. Always used the forum for great source of info and insight. I'm thinking about an HX cluster expansion. A mixed cluster is already in place, and it will be expanded with another only compute node (exactly same HW of the...
HI Support, I want to monitor UC Server 240-M5 and 220-M5 PSU, FAN,Hardware failure through SNMP on Prime infrastrucutre 3.7.I am using CISCO CIMC portal for SNMP confguration. I am not able to recieve the SNMP Traps on the Prime infrastrucutre.I am ...
Hello, Actually I'm having a problem with a UCS C220 M3 server. I have connected management port on dedicated mode, I have connection at the begining but some time later (days or weeks) it lost connection, not http access neither ping.Some systems pa...
I am having an issue where my UCS server hangs on bootup at the "Configuring and testing Platform Hardware..." I have followed the necessary steps to clear the CMOS using the jumper on the J1E6 header, but when I put it on pins 2 and 3, the server w...
Hi,I currently have UCS 5108 AC2 Chassis with 3 UCS B200 M4 Blade Server which has VMWARE ESXI installed on it.Is it possible to add a new UCS Blade Server like B420 or B460? It will not make problems? And of course install ESXI on it as well...Will ...
HI , I am using UCS C220M4L and trying to load ubuntu. I see after mapping to CVD/DVD connections resets and then ubnutu image not visible in CD/CVD and even the boot sequence does not show any dvd mapped drive. I tried changin the different java v...
Hello, We are running Cisco UCS which si connected with FI to cisco 4510R switch and problem is we are not receiving RSPAN and ERSPAN packets on UCS server machine. we advise any workaround for this. We are trying to resolve this issue via using PPTP...
Hi,I'm trying to create a raid1 config on an UCS managed C240M5 server with 240GB SATA M.2 disks.I have done the same as described in this thread:https://community.cisco.com/t5/unified-computing-system-blogs/how-to-boot-esxi-on-ucs-m2-hwraid-boot-opt...
Hi,We are trying to configure Zabbix for Alerting and monitoring of Cisco UCS.can you guide me on how to do this.?UCS Central 2.0(1i)Zabbix version 3.4. Thank you.
I have a UCS-EN140N-M2 in an ISR4451 router (running Cisco IOS XE Software, Version 16.08.01) with this configuration:router#show platform Chassis type: ISR4451-X/K9 Slot Type State Insert time (ago) --------- ---...
Why do UCS system event logs show 1970 dates? This SEL was cleared a couple days ago. I see this A LOT in UCS. What's the deal? Number of SELs:81 | 01/12/1970 23:46:43 UTC | CIMC | Event Logging Disabled SEL_FULLNESS #0x9b | Log Area Reset/Cleared ...
Hi,I was curious to know more about the service Bug Scrub. Is this applicable to any Cisco appliance/ software? Hope you can help me.Thank you in advance.
Hi, trying to deploy HX and getting the following error: Configuring static ip on the specified ESXi servers Server sys/rack-unit-2 config failed Reason: Unexpected prompt got through SoL for esxi Server sys/rack-unit-3 config ...
What is the best practice for bios policy on UCS C240M5 and UCS Manager 4.1 with VMware VSAN 7. I try to find whitepaper found this https://www.cisco.com/c/en/us/solutions/collateral/data-center-virtualization/unified-computing/whitepaper-c11-735680....
