Hi team
I have problems with the creation of a FI cluster, from the FI-B I get the following message:
Enter the configuration method. (console/gui) ? console
Installer has detected the presence of a peer Fabric interconnect. This Fabric interconnect will be added to the cluster. Continue (y/n) ? y
Enter the admin password of the peer Fabric interconnect:
Connecting to peer Fabric interconnect... done
Retrieving config from peer Fabric interconnect... done
/isan/bin/first-setup.core: line 1371: /isan/bin/sp_getversion.sh: No such file or directory
Peer Fabric interconnect Mgmt0 IPv4 Address: 172.16.1.1
Peer Fabric interconnect Mgmt0 IPv4 Netmask: 255.255.255.0
Cluster IPv4 address : 172.16.1.100
Peer FI is IPv4 Cluster enabled. Please Provide Local Fabric Interconnect Mgmt0 IPv4 Address
Physical Switch Mgmt0 IP address : 172.16.1.2
Apply and save the configuration (select 'no' if you want to re-enter)? (yes/no): yes
Applying configuration. Please wait.
Error while exchanging SSH keys. Rebooting in 30 secs
Error while exchanging SSH keys. Rebooting in 30 secs
If someone has information on how to solve this problem I appreciate it
