Cisco Nexus 5548UP fc ports don't establish connectivity with Netapp 2554 fillers

[KENNEDY BIZUAYEHU TADEGE]

Dear all,

we're deploying a new Flexpod system which is composed of Netapp FAS 2554 filler, cisco nexus 5548UP fabric switch and 5108 UCS blade chassis having two 460 series blade servers. but when we connect the nexus 5548UP ports configured to operate in FC mode with the Netapp 2554 fillers, the interface couldn't come up. Kindly advise. 

Regards,

[Walter Dey]

Is the port a FC port ?

Do you have vsan's defined; each port is assigned a vsan !

Do you have a proper FC gbic in the port ?

Please post cli: sho interface fc .....