03-11-2012 11:36 PM - edited 03-01-2019 10:19 AM
Hi,
I'm trying to install Cisco SRE-V software on CISCO-2911-UCSE/K9 but failed.
Here messages-
yourname#SERVIce-module sm1/0 status
Service Module is Cisco SM1/0
Service Module supports session via TTY line 67
Service Module is trying to recover from error
Service Module heartbeat-reset is enabled
Service Module status is not available
Module resource information:
CPU Frequency: 1865 MHz
Memory Size: 2530 MB
Disk 0 Size: 500107 MB
Disk 1 Size: 500107 MB
Disk 2 Size: 2055 MB
Install of ftp://*****:*****@5.5.5.10/sre-v-k9-r.SPA.smv.2.0.1.pkg in progress
Install status : Waiting for RBIP registration
Local Partition Info - (0 apps)
=====================
Retrieving partition information
Mar 12 06:12:53.679: %SM_INSTALL-3-INST_SCRIPT_FAIL: Execution of script sre-v-k9-r.SPA.smv.2.0.1.pkg.install.sre failed, installation aborted
Where can be problem, what can i check?
Regards,
Mike
03-12-2012 07:14 AM
md5 of sre-v-k9-r.SPA.smv.2.0.1.pkg.install.sre is okay?
03-15-2012 04:14 AM
it's ok
it is constantly send message
yourname#
Mar 15 11:08:34.571: %SM_INSTALL-6-INST_RBIP: SM1/0 received msg: RBIP Registration Request
Mar 15 11:08:34.575: %SM_INSTALL-6-INST_RBIP: SM1/0 received msg: RBIP File Request
Mar 15 11:08:36.159: %SM_INSTALL-6-INST_RBIP: SM1/0 received msg: RBIP File Request
Mar 15 11:08:46.491: %SM_INSTALL-6-INST_RBIP: SM1/0 received msg: RBIP File Request
Mar 15 11:08:46.567: %SM_INSTALL-6-INST_RBIP: SM1/0 received msg: RBIP File Request
yourname#service-module sm1/0 status
Service Module is Cisco SM1/0
Service Module supports session via TTY line 67
Service Module is trying to recover from error
Service Module heartbeat-reset is enabled
Service Module is in fail open
Service Module status is not available
Module resource information:
CPU Frequency: 1865 MHz
Memory Size: 2530 MB
Disk 0 Size: 500107 MB
Disk 1 Size: 500107 MB
Disk 2 Size: 2055 MB
Install of ftp://*****:*****@5.5.5.10/CUCME/sre-v-k9-r.SPA.smv.2.0.1.pkg in progress
Install status : File sre-v-k9-r.SPA.smv.2.0.1.pkg.install.sre requested
Local Partition Info - (0 apps)
=====================
Retrieving partition information
yourname#service-module sm1/0 status
Service Module is Cisco SM1/0
Service Module supports session via TTY line 67
Service Module is trying to recover from error
Service Module heartbeat-reset is enabled
Service Module is in fail open
Service Module status is not available
Module resource information:
CPU Frequency: 1865 MHz
Memory Size: 2530 MB
Disk 0 Size: 500107 MB
Disk 1 Size: 500107 MB
Disk 2 Size: 2055 MB
Install of ftp://*****:*****@5.5.5.10/CUCME/sre-v-k9-r.SPA.smv.2.0.1.pkg in progress
Install status : File sre-v-k9-r.SPA.smv.2.0.1.pkg.install.sre requested
Local Partition Info - (0 apps)
=====================
Retrieving partition information
yourname#
Mar 15 11:09:12.659: %SRE_SM-6-STATE_CHANGE: SM1/0 changing state from SERVICE_MODULE_STATE_ERRQ to SERVICE_MODULE_STATE_STDY
and finaly-
SM1/0 is reset due to
Can not download sre-v-k9-r.SPA.smv.2.0.1.pkg
error code 0 : error type 'couldn't connect to host'.
Mar 15 11:09:54.215: %SM_INSTALL-6-INST_FAIL: SM1/0 is reset due to
Can not download sre-v-k9-r.SPA.smv.2.0.1.pkg
error code 0 : error type 'couldn't connect to host'.
Mar 15 11:09:54.215: %SRE_SM-6-STATE_CHANGE: SM1/0 changing state from SERVICE_MODULE_STATE_STDY to SERVICE_MODULE_STATE_ERRQ
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide