Hi
I have some issues after migrate from CX4 SAN to VNX SAN. Everything is moved from CX4 to VNX and I have disabled FC Uplink port that is connected to CX4. Both my FI's is only connected to VNX.
We want SAN boot on our ESXi host, and some of them is install on a boot LUN on VNX, and some other is install local at the Blade.
My issue is that all my host shall boot from SAN. But suddenly this fails.
I zones the host on our MDS switches, and does everything in VNX, so the host shall see its boot LUN. SAN Boot Target is changed so it sees the VNX SAN.
In the install I see my boot LUN, and install ESXi without any issues. Remove the installation media and reboots the server.
When it shall boot back up, it says:
Reboot and Select proper Boot device
or Insert Boot Media in selected Boot device and press a key.
And i gets 8 major error messages like this:
VIF 1 / 2 B-42/44 down, reason: Bound Physical Interface Down
What is wrong. I do the same thing now, as I did when I installed the hosts that is working.
