cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
377
Views
0
Helpful
2
Replies

Regarding UCS monitoring through NIMSOFT tools (SR 680643379)

subramaniam.r
Level 1
Level 1

Hi Team,

As per discussion with the cisco TAC for the SR 680643379 told to reach cisco form for more support.

We are using Cisco UCS box C -220 M3S  firmware 2.0v, 1.5v and 1.4v , we need to monitor the server through Nimsoft tool.

We are worked with cisco TAC but we unable to get more information on OID's details and object name details for our requirement.

On the below link which is share by tac team for the faulty error.But we need OID's details for the mention faulty codes.

http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/c/sw/fault/reference/guide/Cisco_UCS_C-Series_Servers_CIMC_Faults/CIMC_Faults.html#wp1084944

Could you help me on this.

Thanks & regards

Subramaniam R

2 Replies 2

subramaniam.r
Level 1
Level 1

Any body can you help me on my query.

Wes Austin
Cisco Employee
Cisco Employee

Hello,

These links should be helpful:

ftp://ftp.cisco.com/pub/mibs/supportlists/ucs/ucs-manager-supportlist.html

http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/sw/mib/b-series/b_UCS_MIBRef.html

Related Post:

https://supportforums.cisco.com/discussion/11456356/snmp-traps-and-monitoring-ucs

Please mark answer as correct if it was helpful.

HTH,

Wes

Review Cisco Networking for a $25 gift card

Review Cisco Networking for a $25 gift card