03-23-2016 11:30 AM - edited 03-01-2019 12:39 PM
I would like to update my infrastructure devices and B200M3/4 servers to FW 2.2(6x).
I can't update my B230M1 servers - vSphere 5.5 U3 is not supported on FW greater than 2.1(3x).
I can't find a document concerning co-existence between down level firmware versions, i.e. 2.0(x) and 2.1(x) are OK, but not 2.0(x) and 2.2(x)...
Anyone have information?
Here are current levels:
UCS Manager |
2.2(5b) | |
Fabric Interconnect A (subordinate) | Cisco UCS 6120XP | 5.2(3)N2(2.25b) - Kernel / System |
Fabric Interconnect B (primary) | Cisco UCS 6120XP | 5.2(3)N2(2.25b) - Kernel / System |
Chassis 1 | Cisco UCS 5108 | |
IO Module 1 | Cisco UCS 2104XP | 2.2(5b) |
IO Module 2 | Cisco UCS 2104XP | 2.2(5b) |
Server 1 | Cisco UCS B230 M1 | |
Adapter 1 | Cisco UCS M81KR | 2.1(3g) |
BIOS | Cisco UCS B230 M1 | B230.2.1.3.0.082020131642 |
Board Controller | Cisco UCS B230 M1 | B230100D |
CIMC Controller | Cisco UCS B230 M1 | 2.1(3g) |
Chassis 2 | Cisco UCS 5108 | |
IO Module 1 | Cisco UCS 2204XP | 2.2(5b) |
IO Module 2 | Cisco UCS 2204XP | 2.2(5b) |
Server 2 | Cisco UCS B200 M3 | |
Adapter 1 | Cisco UCS VIC 1240 | 4.0(5bS2) |
BIOS | Cisco UCS B200 M3 | B200M3.2.2.4a.0.041720151158 |
Board Controller | Cisco UCS B200 M3 | 13 |
CIMC Controller | Cisco UCS B200 M3 | 2.2(5b) |
Server 3 | Cisco UCS B200 M4 | |
Adapter 1 | Cisco UCS VIC 1240 | 4.0(5bS2) |
BIOS | Cisco UCS B200 M4 | B200M4.2.2.4a.0.041620151912 |
Board Controller | Cisco UCS B200 M4 | 9 |
CIMC Controller | Cisco UCS B200 M4 | 2.2(5b) |
Solved! Go to Solution.
03-23-2016 01:19 PM
If I understand you correctly, you are asking if you can keep your M1 blades at a lower firmware level and if so, how low. If so, check out table 2 on the 2.2 release notes:
http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/release/notes/ucs_2_2_rn.html
Yes1 |
||||||||||||||
Is this what you are looking for?
03-23-2016 01:19 PM
If I understand you correctly, you are asking if you can keep your M1 blades at a lower firmware level and if so, how low. If so, check out table 2 on the 2.2 release notes:
http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/release/notes/ucs_2_2_rn.html
Yes1 |
||||||||||||||
Is this what you are looking for?
03-23-2016 01:35 PM
Don,
Thanks for the quick response.
That is what I am looking for.
Totally missed this in the notes!
Dan
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide