Hi All
i have UCS manger 4.3q, 2xFI 6140 and connected to Cisco MDS 9509 v4.2( 4 FC link from FIA to MDS A, and 4 FC uplink from FIB to MDS B) and connected to SUN SAN storagetek 6140(one FC port to MDS A from SP1 and one FC port to MDS B from SP2), i created service profile with 2 VHBA for FIA and FIB (with different VSAN), after that we installed ESXi 4.1 on local disk but when we tried to brows LUN created on SAN we can not.
from both FI we can see WWPn:WWPN for each VHBA in created server, from MDS also i can see floggi output for SAN (WWN,WWPN) as target and Server VhBA as initiater.
i make all possible isolation even i disbaled FC of FI B, and till now we can not access LUN on SAN, as per SAN admin LUNS created and mapped correctly, so appreciate your support to solve this.
Many thanks.
