UCS Server CPU Allocation

[Amit23]

Dear Guys...

As i am aware aabout UCS server and UCS system..

one physicla cpu is equal to virtual cpu...

but as i seen many application that having more that 6 cpu need i want to run on one UCS sever...how can adjust the cpu for them?

As i have given the BOQ below, it is having 2 servers and 4 CPU but i need to isntall many application:

CUCM

CCUCN

CCX

WEBEX

presence

SO it takes around 5-6 cpu for installation...and also 1 cpu per vmware software also need...

so that can you help me to correct for this issue and easy way to understand and configure the correct ucs server for my applications...?

Thanks and Regard's

Amit Sharma       

[michaelstump]

You don't need to have a 1:1 ratio for physical CPUs and vCPUs. You should, if possible, keep your vCPUs close to the number of logical CPUs present in your host. If not, ESXi will let you overcommit vCPUs on your host if you need to.

Hope this helps.

mike

[padramas]

Amit,

Please start from here for running UC apps on UCS

http://docwiki.cisco.com/wiki/UC_Virtualization_Supported_Hardware

http://docwiki.cisco.com/wiki/Unified_Communications_VMware_Requirements

HTH

Padma