ā12-05-2014 06:31 AM - edited ā03-01-2019 11:56 AM
Hi,
We have a ucs b5108 and after upgrading the firmware from 1.3 to 2.13 this has enabled the power cap feature we are now getting A Critical error
Code F999984
FSM:Failed Cap the power consumption of the cassis (FSM:sam:dme:EquipmentChassisPowerCap) this looks like on of the blades it telling the chassis it is consuming more power than the chassis can provide 26824232W when the power supply is only 500W
Has anyone see this before?
Solved! Go to Solution.
ā12-05-2014 07:44 AM
Trevor,
It's very likely you hit https://tools.cisco.com/bugsearch/bug/CSCub90055/?reffering_site=dumpcr just keep going with the upgrade and be sure it is completed successfully and let us know if the issue is still present after the upgrade is 100% complete.
-Kenny
ā12-05-2014 07:44 AM
Trevor,
It's very likely you hit https://tools.cisco.com/bugsearch/bug/CSCub90055/?reffering_site=dumpcr just keep going with the upgrade and be sure it is completed successfully and let us know if the issue is still present after the upgrade is 100% complete.
-Kenny
ā12-08-2014 05:00 AM
Hit the nail on the head the second IOM was the issue reapplied firmware this erro has now gone
Thanks
ā12-08-2014 06:09 AM
Glad to help
-Kenny
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide