Hello,
I got a problem with 3 Cisco UCS C460 M2 that is using VMware ESXi 5.0, the problem is that the servers work fine for 2 or 3 days and after that display a purple screen with the message "LINT1 motherboard interrupt. This is a hardware problem; please contact you hardware vendor".
We have Raised a case with Cisco TAC and VMware to found the issue and after several updates of BIOS, Drivers and Firmware we still having the same Issue.
At this point VMware is telling us that is a hardware problem ( http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=1804 ) but in CIMC everythinks looks good and a Cisco TAC guy told us that there is no sollution for this issue, so I am really concerned because all the things in the server are in the compatibility Matrix of Cisco for run ESXI 5.0
http://www.cisco.com/web/techdoc/ucs/interoperability/matrix/matrix.html
Here you got the configuration of the server
| UCSC-BASE-M2-C460 | UCS C460 M2 Rack SVR w/o CPU, Mem HDD, PCIe | 1 |
| UCS-CPU-E74830 | 2.13 GHz E7-4830 105W 8C CPU / 24M Cache | 4 |
| A02-M316GB3-2 | 16GB DDR3-1333MHz RDIMM/PC3-10600/2x8GB 2R Kit/Low Volt | 8 |
| RC460-PL002 | LSI CONTROLLER 9240-8i (NO BATTERY BACK UP) | 1 |
| R2XX-RAID1 | Enable RAID 1 Setting | 1 |
| A03-D300GA2 | 300GB 6Gb SAS 10K RPM SFF HDD/hot plug/drive sled mounted | 2 |
| N2XX-AIPCI02 | Intel Quad port GbE Controller (E1G44ETG1P20) | 2 |
| N2XX-AQPCI03 | Qlogic QLE2462, 4Gb dual port Fibre Channel Host Bus Adapter | 2 |
| RC460-PSU2-850W | 850W POWER SUPPLY UNIT FOR C-SERIES C460 M1 | 2 |
| CAB-N5K6A-NA | Power Cord, 200/240V 6A North America | 4 |
| A02-MEMKIT-008B | Bundle component for A02-M316GB3-2 | 16 |
| RC460-CBLARM | CABLE MANAGEMENT ARM FOR C460 M1 | 1 |
| RC460-SLDRAIL | RAIL KIT FOR THE UCS C460 M1 RACK SERVER | 1 |
| UCSC-MRB-002-C460 | MEMORY RISER BOARD FOR C460 M2 SERVER ONLY | 8 |
| N20-BBLKD | HDD slot blanking panel for UCS B-Series Blade Servers | 10 |
| RC460-BHTS1 | CPU HEAT SINK FOR UCS C460 RACK SERVER | 4 |
| RC460-PSU2-850W | 850W POWER SUPPLY UNIT FOR C-SERIES C460 M1 | 2 |
Hopully you can help me
Regards
