cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1050
Views
0
Helpful
1
Replies

w2k19 install failed on UCS-M2-HWRAID

pontos
Level 1
Level 1

Hallo,

 

It is about a Windows server 2019 installation. Without and with SCU the installation fails after the first boot.

Error message: "The computer restarted unexpectelly or encountered an unexpected error.

Windows Installation cannot proceed.*".

Please see attachment.

 

The raid was created and displayed cleanly in SCU.
We have already deactivated all unnecessary components in bios.

 

Maybe somebody already had the problem and can give me a advice.

 

Server: UCSC-240-M5L

Firmware: 4.1.2a

 

Disk Controller: UCS-M2-HWRAID

Firmware: 2.3.17.1012

 

SCU: ucs-cxxx-scu-6.1.2d.iso

 

Boot Mode: UEFI

 

Windows ISO:

SW_DVD9_Win_Server_STD_CORE_2019_1809.7_64Bit_English_DC_STD_MLF_X22-38323.iso

(checksum alreday verified)

1 Reply 1

Priyanka L
Cisco Employee
Cisco Employee

Hi There,

 

Please let me know if you were able to install or still facing the same issues?

1. We can attempt to format the install disks and re-install
2. Reach out to Windows with the OS dump to check if they can isolate on this further, as UCS might not show any errors.

Review Cisco Networking for a $25 gift card

Review Cisco Networking for a $25 gift card