cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
941
Views
0
Helpful
3
Replies

What kind of PDU do folks like for the UCS?

mmedwid
Level 3
Level 3

I am planning to deploy UCS in the next month or so.  It sounds like each UCS chassis requires four L6-20 receptacles.

And we're getting two chassis.  So I was looking to get a couple of Pulizzi like the onces below.  Anyone prefer another

type for better managability or other reasons?  Also - is the L6-20 the only power option for the UCS?  Thanks.

http://powerquality.eaton.com/ePDU-LPC208-2P.aspx?cx=3

1 Accepted Solution

Accepted Solutions

Linda Carr
Level 1
Level 1

There is a 110 plug into a specialized PDU in the rack.  Check with your Cisco rep for the part number - it works great.  We deployed approximately 100 chassis and this worked very well.

Linda

View solution in original post

3 Replies 3

Linda Carr
Level 1
Level 1

There is a 110 plug into a specialized PDU in the rack.  Check with your Cisco rep for the part number - it works great.  We deployed approximately 100 chassis and this worked very well.

Linda

kg6itcraig
Level 1
Level 1

I used to be an APC guy, but really liking this company these days http://www.servertech.com/products/pops-per-outlet-power-sensing/pops-switched-cwg-30vd-vy-3ph-20-30a-busway-24xc13-6xc19-with-pips

You can monitor and admin Much Better, and these PDU's can be set to turn off during thermal events.

Craig

My UCS Blog http://realworlducs.com

Does this PDU work in most standard cabinets, like an APC?

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: