cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
987
Views
0
Helpful
5
Replies

WIN server 2008 For UCS 200

elsayed fouad
Level 1
Level 1

Good Day,

we have a UCS 200 and we tri many time to install WIN server 2008 ent.

but   every time we face a problem, which " we get a error massage that is  the computer restarted unexpectedly or encountered an unexpected error.  Windowos installation cannot proceed. To install Windows. click "OK" to  restart the computer. and restart the installation " after that no thing  happen.

can any body help me about this issues or told me how we can install WIN Server in UCS 200

1 Accepted Solution

Accepted Solutions

padramas
Cisco Employee
Cisco Employee

Hello Elsayed,

Please provide us additional information to know about your setup

Are you performing installation to local hard disks or SAN ?

Complete version of Windows OS and CIMC version

At what stage of installation do you receive the above error message ?

Did you verify the checksum of the ISO image ?

Padma

View solution in original post

5 Replies 5

padramas
Cisco Employee
Cisco Employee

Hello Elsayed,

Please provide us additional information to know about your setup

Are you performing installation to local hard disks or SAN ?

Complete version of Windows OS and CIMC version

At what stage of installation do you receive the above error message ?

Did you verify the checksum of the ISO image ?

Padma

Hi Padma,

now i removed the NIC and install WIN server 2008 R2 (64 bit ), it is succeed .

but i face another problem i try to install CSM 4.0 , i get the attache error massage

so do you have any idea for this issues

Elsayed,

So did you just reseat the NIC card or completely removed it ? What NIC card do you have on the server ?

I do not have much knowledge about CSM. As per the error message and following doc, terminal services should be disabled on your Windows OS for successful installation of CSM

STEP 4

http://www.cisco.com/en/US/docs/security/security_management/cisco_security_manager/security_manager/4.2/installation/guide/servprep.html#wp1043342

HTH

Padma

Padma,

frist i removed it and after installion i reconnect NIC again.

kindly how can i disable Terminal Services.


Elsayed,

Generally speaking, you can start / stop / disable the services from services management console

start > run > services.msc and then look for terminal services.

Since this is specific to CSM application installation, you might want to check with people / forum board who are more knowledgeable in it to confirm if this is the real issue that prevents your installation or not.

Padma

Review Cisco Networking for a $25 gift card

Review Cisco Networking for a $25 gift card