On some of the servers we manage I'm not able to access CIMC. Either IP has changed (I don't have local access) or its not reachable for some reason. However I can access all the servers through vSphere / ESX. Is there any way I can confirm IP Add...
We are attempting to upgrade our current VMWare environment from v6.7 to v7.0U3.We were able to upgrade vCenter with little trouble.However, attempting to upgrade our ESXi host - we only have one on this particular hypervisor - has not been as easy.F...
Hello,We are going to setup X series newly in one of our locations. Just wanted if there are any best practices to be followed and also need to know if this has to be set up in UCSM or IMM Mode as the datasheets for X series 9508 Chassis are having M...
Hi,I am having a weird issue with KVM Launching in a B200 M5 Blade. When I am trying to launch the console without the service profile, I can get to the console normally, whereas when I am launching the console post association of service profile. I ...
Hi All,I am unable to do the cisco hyperflex (Contains 4 nodes) upgrade from and keeps on getting below error. I have already checked firmware/software compatibility before upgrade and also ran pre-check script with no errors/warning in output. ...
UCS Manager 4.3(3) adds the following support: - 5th Gen Intel® Xeon® Scalable Processors and 5600MHz DDR5 DIMMs for UCS M7 servers; - Intel Data Center GPU Flex for C220 M7 and C240 M7 servers For more details, please refer to following release ...
Hi everyone,I am having some issues, we have 3 UCS C240 M5 nodes, that have previously been running using the Hyperflex platform and FI.Now we are trying to repurpose them to run another site for us, my superiors made the decision that we will run th...
Anyone knows if is possible and how to do a repurpose of Hyperflex M5 nodes in UCS Managed Mode to use that nodes to install Nutanix cluster with AHV Hypervisor?
Cisco UCS Central 2.0(1u) supports the following: Support for the 5th Gen Intel® Xeon® Scalable Processors with Cisco UCS X210c M7, C220 M7 and C240 M7 serversSupport for the following Cisco UCS VIC adapters:Cisco UCS VIC 15427Cisco UCS VIC 15237Ci...
A Field Guide covering advanced network configurations for Cisco Compute Hyperconverged with Nutanix systems. This guide covers network configurations with disjoint layer 2 networks north of the Cisco UCS domain, i.e. two distinct physically separat...
Listen here: S11| E2 Cisco Compute Hyperconverged with Nutanix Cisco recently announced a strategic partnership with Nutanix that aims to deliver the industry’s most complete hybrid cloud solution to simplify customer operations, maximize resiliency,...
Hello,I am running cisco UCSM package version 4.2(3d), I joined 2 C240M4L both running 4.4.0.2f for the BIOS and 4.0(2I) for the CIMC firmware trying to upgrade to 4.1(2k). both were discovered successfully, however when I applied the service profile...
A customer has a UCSC-C220-M3SBE on vsphere>Configuration>Health Status>other I noticed an alert stating : System Board 0 SEL_FULLNESS---Upper fatal What is the impact and how to fix this??!
Hi,I currently have a Cisco UCS-M6-MLB server in standalone mode. We need to convert it to UCS managed mode without losing any data or downtime.What would be the best possible approach and the UCS manager version recommended.Thanks.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: