In this video we will use the Python Tool to update a group of systems
using a configuration file. We will walk through the encryption setup
process for the target CIMC as well as the remote share and how to
reference these encrypted files in an update sc...
In this video we will use the Python Tool to update a single system by
passing configuration flags and options through the CLI to a remote
target. This is the recommended update process for a one-time update to
a single system.
in My Videos)
In this video we will use the Microsoft Tool to update a group of
systems using media attached through NFS and WWW at the same time. We
will review using this system for the first time including a step by
step overview of how to save a configuration file,...
Newbie post but I'm getting conflicting advice and would appreciate some thoughts. We have a UCS environment currently running 2.2(8L) and wish to upgrade to 3.X or 4.X to allow us to purchase and add some M5 blades in preparation for a vSphere upgra...
Running UCS 6232 16UP fabric Interconnects with firmware 4.0.2dConnecting a UCS C220 M5SX server with a VIC 1385 card in PCIe slot 1. Direct Attach.Making a policy for the server and attach it.Before attaching the server to FI, I had VMware ESXi 6.7 u2 in...
I have a B200 M4 with a UCSB-VIC-M83-8P that lost its connections all of a sudden. I reacknowledged the blade and all looks good now, but I'm trying to figure out what happened. What kind of action would cause this? I don't expect anyone...
Hi,I've got C220-M4 server located far away in data center. The problem is that I became server owner, however previous owner could not provide credentials to CIMC. So, I've got CIMC IP address but I cannot log-in.Is there any way to reset CIMC passw...
We have cisco UCSC-C220-M4S server running ESXi 5.5U3,now we are going to upgrade Firmware 4.0(2h) , followed by ESXi 6.5 U2 upgrade using below cisco customized image VMware_ESXi_6.5.0_10719125_Custom_Cisco_184.108.40.206_Bundle.zipRelease Date: 2019...