cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

4576
Views
5
Helpful
2
Replies
Trum
Beginner

10GBASE-T (RJ45) in Switch WS-C3850-48XS-S

There is a switch WS-C3850-48XS-S. you need to connect the server through a 10Gb sfp transceiver using a twisted pair (RJ 45) category 6 or 7 with this switch. Found only such SNR-SFP + T. Is it possible? Or is there some other SFP transceiver? Give, please the link.

1 ACCEPTED SOLUTION

Accepted Solutions
Seb Rupik
VIP Advisor

Hi there,

Cisco does not produce a 10Gb UTP SPF+ transceiver.

Your cheapest option would probably to use twinax so long as the server is not more that 10 meters away, but would require a SFP+ NIC for your server.

https://www.cisco.com/c/en/us/products/collateral/interfaces-modules/transceiver-modules/data_sheet_c78-455693.html

 

cheers,

Seb.

View solution in original post

2 REPLIES 2
Seb Rupik
VIP Advisor

Hi there,

Cisco does not produce a 10Gb UTP SPF+ transceiver.

Your cheapest option would probably to use twinax so long as the server is not more that 10 meters away, but would require a SFP+ NIC for your server.

https://www.cisco.com/c/en/us/products/collateral/interfaces-modules/transceiver-modules/data_sheet_c78-455693.html

 

cheers,

Seb.

View solution in original post

Thank you

Content for Community-Ad